Horizontal directional drilling (HDD) installations generate large volumes of spent drilling mud,...
Our Since its creation in 1982, MULETAPE® has defined what strength, consistency, and innovation look like in the world of pulling and measuring tape. Manufactured exclusively by Neptco, a brand of Chase Corporation, MULETAPE® continues to be the trusted solution for installers and utility professionals requiring dependable performance, year after year, job after job.
Contractor Pain Points in Cable Pulling
On a busy job, the difference between a smooth conductor pull and a costly stoppage often comes down to control: controlling elongation, tension, and time. Stretchy pull lines snap back. Faded marks create guesswork in the conduit. Dry surfaces add friction and heat. The MULETAPE® RP Series solves those problems with a purpose-built recipe: low elongation, indelible footage marks, relubed surface, and rugged HDPE reels — all Made in the USA. Available in 3,300 lb, 4,000 lb, and 6,000 lb rated options, RP helps crews pull safer and finish faster.
Quick Answers
Q1. What makes MULETAPE® RP safer for pulling?
A. Muletape® RP is low-elongation pull tape that keeps tension predictable and minimizes snapback risk. Indelible footage marks and relubed surface improve control and reduce stalls.
Q2. Which MULETAPE® RP rating should I choose?
A. RP-3300 for everyday commercial pulls; RP-4000 for longer runs with multiple sweeps; RP-6000 for demanding paths/larger conductors. Always verify equipment and sidewall limits. Refer to the MULETAPE® Selection Guide for recommended guidelines to choosing your MULETAPE® strength for safety and efficiency.
Q3. Why do footage marks matter on pull tape?
A. Permanent footage marks let crews track distance in real time, stage lubricant precisely, and document as-built lengths without guesswork. Confirming the length of wire and cable you’ll need avoids costly errors by over or under estimating the length of wire.
Q4. What’s the advantage of HDPE reels?
A. HDPE reels resist moisture and impact, feed consistently, and protect the tape and printed marks in rough jobsite conditions. HDPE plastic reels are often made with recycled material and are always recyclable.Q5. Is MULETAPE® RP Made in the USA?
A. Yes, Muletape® RP is made in the USA. U.S. manufacturing supports reliable supply and consistent quality. Documentation, including Buy American Buy American Act (BABA) and Made in America documentation, is available in PDF form.
Low Elongation = Safer Control
High elongation behaves like a slingshot: tension builds, then rebounds if something releases. RP’s low-elongation construction keeps tension predictable through bends and transitions, reducing snapback risk and rework.
Indelible Footage Marks = Fewer Mistakes
Printed footage marks that stay readable are not a nice-to-have — they’re a control mechanism. With indelible marks, you know exactly how much tape has entered the conduit and how much wire and cable you’ll need. Confirming your wire and cable pull length will also let you know if and how much cable lubrication you’ll need.
Pre-lubed for Efficiency — Less Friction, Fewer Stops
Friction is hidden time loss. MULETAPE® RP is pre-lubed so it glides through duct with lower resistance, especially in long pulls and tight radius sections.
HDPE Reels That Survive the Jobsite
Reels get tossed, rained on, and dragged. HDPE reels resist moisture and impact, keep lines cleaner, and feed consistently.
Choose the Right Rating (3,300 / 4,000 / 6,000 lb)
Match the pull to the tape:
- RP-3300: Everyday commercial pulls, moderate distances, typical conduit runs.
- RP-4000: Longer runs, multiple sweeps, heavier conductors.
- RP-6000: Demanding pulls, larger conductors, complex paths where margin matter
For project-specific working strength, consult the Selection Guide.
RP vs. Detectable vs. Tracer Wire
- Muletape® RP: Low-elongation pull tape with footage marks, relubed surface, HDPE reels — for safer, faster pulling.
- Detectable MULETAPE® (DT Series): Pull tape with a built-in detectable conductor. Use only where the spec explicitly allows detectable tape to meet locate requirements.
- Trace-Safe® Tracer Wire: Dedicated conductor with waterproof splices and labeled terminations. The default choice for most utility owners/specs.
When in doubt, install a dedicated Trace-Safe® tracer wire alongside your pull tape; treat detectable tape as supplemental, not a replacement.
The MULETAPE® Advantage
Contractors trust MULETAPE® because it’s consistent, tough, and traceable. RP builds on that legacy with safer handling and more efficient pulls.
Made in USA = Reliable Supply + Quality Control
Domestic supply reduces lead-time variability and supports tighter quality control.
Not sure which break strength to specify? Use the MULETAPE® Selection Guide to match route, duct, fill, lubrication, and knotting method to the right working strength. Download the MULETAPE® Selection Guide
