CIM Industries Blog

It’s said that two heads are better than one. The same principle applies to waterproofing membranes. Typically, you apply a layer of CIM waterproofing, wait for one to four hours, then apply your second layer. This is all after choosing a waterproofing membrane, of course. This is the recoat window for most membranes, and it marks the period of maximum adhesion between layers. That said, there are innumerable reasons why you may miss this recoat period.

It happens, and it isn’t an issue for experienced applicators. With the right tools and technique, you can abrade (rough up) the surface of the membrane to improve its ability to bind well after the surface has set.

The global waterproofing membrane market is on the rise. With a focus on infrastructure and housing options, growth prospects in the construction sector continue to rise. Markets (including the United States, China, Brazil, and India) are seeing above-average growth in new building opportunities and restoration projects, resulting in an increased demand for elastomeric and waterproofing membranes and other coating products.    

With rapid growth worldwide, CIM Industries and its selection of waterproofing solutions, namely CIM 500, has started to corner the market with its revolutionary technology. CIM 500 is a two-part cold liquid waterproofing membrane designed to meet the demands of buried or non-UV exposed applications.  

There is a large misconception in the waterproofing industry that all cold fluid-applied waterproofing membranes are susceptible to osmotic blistering. But this is not the case. Over the years, costly waterproofing repairs have led to a lack of confidence in using cold fluid-applied waterproofing membranes in damp, wet, and immersion environments. Understanding what osmotic blistering is, knowing why it occurs, and choosing the correct product for each job will help minimize the potential for osmotic blisters.

Chevron raised the standards on cold fluid-applied waterproofing membrane applications when they introduced a urethane coating system for synthetic running tracks in the 1960s. Over several decades, this urethane technology morphed into a waterproof bridge deck membrane, now widely recognized as Chase Industrial Membranes (C.I.M. Industries), the leader in the industrial waterproofing market.