CIM Color Shield™ Topcoattransforms high-performance waterproofing systems with its versatile, long-lasting finish. From elevating UV resistance and chemical durability to crafting vibrant, slip-resistant surfaces, mastering the application unlocks the coating’s full potential. This guide leads you step by step through the application process, sharing expert tips and proven techniques to help you achieve flawless, reliable results.

Elastomeric coatings are applied to roofs, walls, and structural surfaces for their flexibility, waterproofing, and UV resistance. Elastomeric polyurethanes bridge cracks and waterproof substrates like concrete and metal. When properly installed, these coatings provide long-term protection and durability. However, defects can occur if surface preparation, application, or environmental conditions are not controlled.

Understanding these defects and how to prevent them is essential for contractors, inspectors, and asset owners. The following outlines common elastomeric coating defects, their causes, and prevention methods.

For decades, waterproofing systems have been built with one goal in mind: performance. But in today’s built environment, performance alone isn’t always enough, aesthetics matter too. That’s where Color Shield™ Topcoat comes in. Color Shield is a next-generation, two-component polyaspartic topcoat designed to deliver UV-stable, color-stable protection, without compromising the proven performance of CIM waterproofing systems.

CIM 1000 Trowel Grade Cartridges are ideal for small applications such as penetrations, joints, cracks and many other small repairs. Cartridges are commonly used for adhesion test patches and repair of CIM coatings.

Cartridges may be partially used and re-sealed for future use, eliminating excess waste where only a small amount of CIM is needed.   

CIM coatings have two components CIM Premix and CIM Activator. Each container has a color-coded label in order to assist with identifying the appropriate combination of CIM Premix and CIM Activator. Learn how to select the right activator and premix. 

Watch the explainer video

Exterior balconies are more than just features on buildings; they are places to host guests, read good books, and enjoy the views. For some, balconies become the focal points of living spaces. People think of the comfort of their living spaces but rarely think about how the building envelope (the exterior skin that acts as a barrier against water, water vapor, air and temperature) works until there is a leak or draft. That same building envelope that creates cozy living rooms and warm sunrooms and beautiful balcony spaces doesn't just provide comfort; it also provides critical protection to the entire structure, ensuring a safe living environment.

The construction industry faces many safety challenges as the work environment is always changing in response to the specific job at hand. One of the most challenging environments is working within confined spaces. There are numerous safety regulations in place meant to keep construction workers safe.

Waterproofing, how difficult can it be?  You purchase the product, get either the sprayer, squeegee or brush ready for application, then spread the material and let it cure, right?  Not quite.  Waterproofing certain areas is a crucial component of many architectural and industrial projects.  While the process may seem simple, there are several factors requiring close attention to ensure the best outcome for the project.  Most important among those are product selection and application.