March 4^th of 2020 represented a potentially seminal date for both suppliers and manufacturers within the printed circuit board industry. This was the date of release of four updated Guobiao or “GB” standards related to the VOC content and other harmful substances allowable within supplied inks, adhesives, and protective coatings in China. This change in regulations is the result of China’s three-year action plan begun in 2018. The plan is intended to improve air quality through reduction of VOC emissions by at least 10% as compared to 2015 levels.

The new standards are straightforward but can become difficult to understand as they are often implemented by city and by region.

IPC CC-830 revision B is a conformal coating qualification standard mostly used by board fabricators, OEM design engineers, and coatings suppliers.  

There are two fundamental uses of this IPC standard:

• Coatings’ performance capabilities
• Quality consistency

In this blog, we will go over some of the specifications along with tests requirements, passing criteria, and quality characteristics.

During your selection of conformal coating you ran in to a specification that you have seen before but not fully understood, MIL-I-46058C.   Conformal coating choices are vast, but with so many available, how does a user pick the correct one? Are there minimum standards that define what a conformal coating is supposed to do? Thankfully, yes there are. This article will focus on one such standard: MIL-I-46058C.

The official title for the specification is MIL-I-46058C, Insulating Compound (For Coating Printed Circuit Assemblies). The standard serves as a material standard, used to evaluate and document that a particular coating meets a list of specific performance attributes (more on those later). The MIL-I-46058C was developed to define a uniform set of test methods and performance requirements for conformal coatings and gives users confidence that the material they select will perform.