In the rapidly evolving electronics landscape, ensuring the reliability and longevity of printed circuit boards (PCBs) is paramount. Conformal coatings have long served as a protective shield against environmental factors such as moisture, corrosion, and thermal stress. However, as technology advances, traditional conformal coatings face new challenges, particularly with modern PCB designs. 

If you're familiar with HumiSeal through our blogs, you know we are big fans of conformal coatings. This is for good reason; with advancing conformal coating technology, innovative LED and UV curable coatings offer incredible protection for a large range of applications.

Conformal coatings are just one method of circuit board protection available to engineers. Those involved with PCBs may be familiar with the terms encapsulation. Encapsulation is a tremendously powerful method to secure and protect PCBs by submerging them in a protective material. In many cases, this is more desirable than selectively applying conformal coatings.

When conventional coating methods such as hand spray, total dipping or robotic selective coating don’t provide the protection required, there is always selective dip coating.

What is selective dip conformal coating?

Selective dip coating is a process whereby the substrate rather than globally immerised in the coating, is discreetly coated in desired locales.  The technique in one form or another, has been around for over 25 years and is used with both classic solvent-based coatings and 100% UV cure conformal coatings.

It's no secret that conformal coatings increase the lifetime of electronic devices by providing a thin barrier that strengthens their ability to withstand harsh environmental conditions. That said, a lesser-known truth is adhesives and encapsulants provide a significantly higher level of protection on the entire assembly.

Why is that? Well, adhesives and encapsulants promote assembly protection by:

• creating environmental seals that protect against moisture and corrosion
• providing high-temperature resistance
• increasing shock and vibration-dampening
• generating strong bonds to a variety of substrates
• maintaining low shrinkage
• offering thermal conductivity

Bury it in

Conformal coatings have a long and storied history with printed circuit boards. A good conformal coating protects PCB components from moisture, corrosion, contaminants, and additional PCB threats like vibration and thermal shock. Coatings are a complicated science, and there isn’t one best coating or application method for every job. These choices are dependent on the design, use case, and assembly of the PCB. For instance, manual brushing PCB coating material is a slow, tedious process; but for small batch applications, it’s quite cost-effective.

Regardless of the chosen method, there are fundamental application errors that can occur, leading to defects forming in the coating which ultimately limit the functional service life of the PCB.

In the days before surface mount printed circuit assemblies, components (such as resistors, diodes, and capacitors) were axial, and printed circuit board components were installed with the “through-hole” method using large conductor spacing. With the advent of integrated circuits, these too were through-hole with good spacing between legs.

We at HumiSeal would like to dedicate a bit of time and space to one of the most often ignored factors related to successful conformal coating processes: Clean Air.

The transition to LED curable conformal coatings is beginning to build momentum, beginning as a slow evolution and developing into a revolution of sorts. The driving forces behind this include: 

• Improved processing equipment designs and availability 
• Aging or outdated application equipment replacements 
• Increasing range of LED curables commercially available or in development 
• Rising labor, equipment, and energy costs  

If you and your organization are faced with aging equipment and higher costs, there isn't a better time to consider the potential advantages of LED curable conformal coatings! 

 HumiSeal UV20Gel is a unique, strong, and flexible gel coating developed to protect PCB (Printed Circuit Boards) components against environmental conditions and vibrations. UV20Gel has proven successful in many demanding industries and product families including-

UV20GEL is a recent innovation from the polymer scientists at HumiSeal.

It provides additional durability and ruggedization for printed circuit boards in demanding applications including automotive, aerospace, and appliances among others. This flexible, high adhesion gel is used for staking taller or sensitive components to provide resistance to vibration and mechanical shock conditions.