This blog post outlines the techniques required for the removal of HumiSeal UV cure conformal coating. The products covered in this article are:
- UV40, UV40-250
- UV50LV
- UV500, UV500LV
5 Comments Click here to read/write comments
Topics: Conformal Coatings, Humiseal, Micro Abrasion, conformal coating removal
UV curable conformal coating materials such as HumiSeal UV40 are frequently used in military, aerospace and automotive applications due to superior resistance to chemicals and mechanical stress. These properties make them difficult to remove when rework under the coating is required.
There are products available for chemical removal of conformal coatings, but many are restricted by government regulation and health and safety concerns.
An effective method for localised removal of conformal coatings, allowing the rework of the components, is the powder or micro-abrasion equipment.
5 Comments Click here to read/write comments
Topics: Micro Abrasion, conformal coating application, conformal coating removal
